Snow slides off metal roofs because the surface is smooth and slick. Instead of sitting in place and slowly melting like it does on shingles, snow and ice on a metal roof tend to build up and then let go in large sheets, often all at once when the sun comes out or a chinook warms the roof. That sliding mass can land on walkways, decks, cars, eavestroughs and lower roofs. Snow guards are the usual answer. They are small devices fastened to the roof that hold the snow in place so it melts off gradually.
Here is why sliding snow happens, where it causes the most trouble, and how snow guards work.
Why Snow Slides Off Metal Roofs
A metal roof is one of the best roofs for shedding snow. That is part of its appeal. But in practice it means:
- Snow builds up during a storm and sticks for a while.
- When the roof warms, from sun, a chinook or heat from the attic, a thin layer of water forms between the snow and the metal.
- Once that layer forms, the whole slab can let go in one piece.
In Calgary, our freeze-thaw cycles make this more common. Snow can partly melt, refreeze into heavy, icy layers and then slide as a dense block. Steeper pitches and long, uninterrupted panels make it slide faster and land harder.
If you are still deciding on materials, our guide to metal roof pros and cons in Calgary covers this along with other things to weigh.
Where Sliding Snow Causes Problems
Sliding snow is mostly a problem when something or someone is below the roof edge. Common trouble spots:
- Front entrances and steps. A sheet of snow or ice coming off over a doorway is a real safety hazard.
- Walkways and side paths. Especially narrow paths between houses.
- Decks and patios. Snow can damage railings, furniture and the deck boards.
- Driveways and parking areas. Vehicles parked under the eaves can be dented or have windshields cracked.
- Eavestroughs. Sliding snow can catch the trough and bend it or rip it off. If yours has been damaged, our eavestrough repair service can fix or replace the damaged sections.
- Lower roofs. Snow from an upper roof can slam onto a lower roof and damage vents or the roofing below.
- Gas meters, AC units and vents. Equipment along the wall can be crushed or buried.
- Shrubs and gardens along the foundation.
What Snow Guards Are
Snow guards are devices installed on the roof surface, usually in rows or patterns above the eaves, to hold snow in place. Instead of sliding off as one slab, the snow stays put and melts away gradually, draining off as water.
Common styles include:
- Pad-style guards. Individual pieces spread out in a pattern across the lower part of the roof.
- Bar or rail-style guards. A continuous rail, sometimes with a second bar, running along the roof to create a fence that holds snow back.
How they attach depends on the roof:
- Standing seam metal roofs often use clamps that grip the raised seams, so the panels themselves do not need to be pierced.
- Exposed fastener metal panels usually need guards fastened through the panel into the structure, with proper sealing at each fastener.
The right type, spacing and number of rows depend on the roof pitch, the panel profile, how long the slope is, and how much snow you expect. Manufacturers usually provide layout guidance for their products, and an experienced installer should follow it.
Can Snow Guards Be Added to an Existing Metal Roof?
In many cases, yes. Snow guards can often be retrofitted to a metal roof that is already on the house. The installer needs to know the panel type and make sure the guards are compatible and sealed correctly.
If you are planning a new metal roof, it is easiest to talk about snow guards at the quote stage, so placement over entrances and walkways is planned from the start.
What to Do This Winter Before Guards Are Installed
If you have a metal roof that is dropping snow now, keep people safe in the meantime:
- Keep people, kids and pets out of the drop zone along the eaves, especially on sunny or chinook days.
- Use a different entrance if snow is building above your main door.
- Do not park cars right under the roof edge.
- Do not try to pull snow off a metal roof with a rake. Snow can come down all at once on top of you, and metal tools can scratch the coating.
- Never climb onto a snowy or icy metal roof. It is extremely slippery. Stay on the ground.
Snow that has already slid tends to pile up and harden into icy ridges along walks and driveways. Our sister company Calgary Snow Pro offers residential snow removal and can help keep those paths clear through the season.
Frequently Asked Questions
Do all metal roofs need snow guards?
Not always. If the roof edge is over open lawn with nothing below, sliding snow may not be a concern. Snow guards matter most over entrances, walks, decks, driveways, lower roofs and anything else that could be hit.
Will snow guards damage my metal roof?
When the right type is chosen and installed correctly, they should not. Clamp-on guards for standing seam roofs avoid piercing the panels. Through-fastened guards need proper sealing. Poorly chosen or badly installed guards can cause leaks or fall off, so the installation matters.
Do snow guards hold too much weight on the roof?
They hold snow in place, which is what an asphalt roof does naturally. A roof in good condition is designed to carry the snow load expected in the area. If you have concerns about a particular roof, have it looked at.
Does snow slide off asphalt shingle roofs too?
Much less. The rough surface of shingles tends to hold snow in place. You can still get some sliding on steep shingle roofs, but sheets of snow and ice are much more common on metal.
When to Call Us
If you are thinking about a metal roof, or your current roof needs replacing, we can walk you through options, including how to handle snow over entrances and walkways. Roof replacement quotes are free.
Get a free roof replacement quote or call us at (587) 969-2720.
